Printhead errors – Lexmark Prospect Pro208 User Manual
Page 21
5
Complete the initial printer setup.
C
HANGE
THE
LANGUAGE
USING
A
BUTTON
COMBINATION
(
IF
YOU
CANNOT
READ
THE
CURRENT
LANGUAGE
)
1
Turn the printer off.
Note: If you have set the Power Saver timeout in the Setup menu, then press and hold
for three
seconds to turn off the printer.
2
Press and hold down
and
, and then press and release
to turn the printer on.
Note: Do not release
and
until Language Selection appears on the display, indicating
that the printer has been reset.
3
Complete the initial printer setup.
Printhead errors
If the "Before you troubleshoot" checklist does not solve the problem, then try the following:
R
EMOVE
AND
REINSERT
THE
PRINTHEAD
1
Open the printer and lift the latch.
2
W
F
I
I
P
R
IN
T
IN
G
2
Remove the printhead.
Warning—Potential Damage: Do not touch the printhead nozzles.
3
Wipe the printhead contacts using a clean, lint-free cloth.
4
Reinsert the printhead, and then close the latch until it clicks.
5
Close the printer.
Note: If removing and reinserting the printhead does not resolve the error, then contact technical support.
21