Lancom Systems LCOS 3.50 - Manual (Page 320)

LANCOM Reference Manual LCOS 3.50 ̈ Chapter 14: Virtual Private Networks—VPN
320
V
irt
ua
l Pri
vat
e Ne
two
rks—
VP
N
accessible in the remote and in the local LAN. In each case, define the
router as the remote VPN gateway and switch the IP masquerading off.
For the “VPN gateway 2”, the following entries are necessary so that the
remote network sections can be reached.
For those subnetworks connected to your own LAN, define the router as
the IP address for the appropriate LAN router.
These entries enable VPN gateway 2 to forward packets arriving from the
remote network to the correct sections of the local network.
ቧ Under Configuration ̈ Firewall/QoS ̈ Object table make an entry
for each part of the network that should be used as a source or destination
for the VPN connection via “VPN GATEWAY 1” (“VPN-GW1-LOCAL” and
IP address Net mask Router IP masquerading
10.1.0.0 255.255.0.0 VPN gateway 1 No
10.2.0.0 255.255.0.0 VPN gateway 1 No
10.3.0.0 255.255.0.0 VPN gateway 1 No
IP address Net mask Router IP masquerading
10.5.0.0 255.255.0.0 10.4.0.5 No