LevelOne ProCon GSW-2496 - Manual (Page 9)

l
1
1. Introduction
1-1. Overview
GSW-2496, a 24-port Gigabit L2 Managed Switch, is a standard switch that
meets all IEEE 802.3/u/x/z Gigabit, Fast Ethernet specifications. The switch
included 8-Port 10/100/1000Mbps TP and 16-Port Gigabit SFP Fiber management
Ethernet switch. The switch can be managed through RS-232 serial port via directly
connection, or through Ethernet port using CLI or Web-based management unit,
associated with SNMP agent. With the SNMP agent, the network administrator can
logon the switch to monitor, configure and control each port’s activity in a friendly
way. The overall network management is enhanced and the network efficiency is
also improved to accommodate high bandwidth applications. In addition, the switch
features comprehensive and useful function such as QoS (Quality of Service),
Spanning Tree, VLAN, Port Trunking, Bandwidth Control, Port Security,
SNMP/RMON, IGMP Snooping capability via the intelligent software. It is suitable
for both metro-LAN and office application.
In this switch, 1000Mbps SFP Fiber transceiver is used for high-speed
connection expansion.
Model No. Description
GVT-0300 SFP Transceiver LC, SX Multi-mode 550m
GVT-0301 SFP Transceiver LC, LX Single-mode 10km
GVT-0302 SFP Transceiver LC, ZX Single-mode 70km
10/100/1000Mbps TP is a standard Ethernet port that meets all IEEE
802.3/u/x/z Gigabit, Fast Ethernet specifications. 1000Mbps SFP Fiber transceiver
is a Gigabit Ethernet port that fully complies with all IEEE 802.3z and 1000Base-
SX/LX standards.
For upgrading firmware, please refer to the Section 3-21 or Section 4-2-2 for
more details. The switch will not stop operating while upgrading firmware and after
that, the configuration keeps unchanged.
Important Note:
GSW-2496 supports the following vendor’s mini-GBIC transceiver only
1. LevelOne
2. Avago
3. Finisar