LevelOne ProCon GSW-2496 - Manual (Page 192)

184
set mode
Syntax:
set mode
Description:
To set up the mode of IGMP Snooping.
Argument:
: 0:disable, 1:active, 2:passive
Possible value:
: 0,1or 2
Example:
GSW-2496(igmp-snooping)# set mode 2
show igmp-snooping
Syntax:
show igmp-snooping
Description:
To display IGMP snooping mode and allowed IP multicast entry.
Argument:
None.
Possible value:
None.
Example:
GSW-2496(igmp-snooping)# show igmp-snooping
Snoop Mode: Active
IP Multicast:
1) IP Address : 224.1.1.1
VLAN ID : 0
Member Port : 22
show multicast
Syntax:
show multicast
Description:
To display IP multicast table.
Argument:
None.
Possible value:
None.
Example:
GSW-2496(igmp-snooping)# show multicast
IP Multicast: None