LevelOne ProCon GSW-2496 - Manual (Page 79)

l
71
Parameters description:
State:
Open the Loop Detection capability per port. The list has “Enable” and
“Disable”. Default is “Disable”.
Current Status:
Show the looping status per port. It could be “Unlocked or Locked”. Default
is “Unlocked”. When some port happens looping, it will show “Locked”
Resume Action:
Remove the looping status per port. Just tick the check box ( ;) of the
Unlock to open resume action per port.
Refresh:
“Refresh” button could appear the instant Current Status of Loop Detection.