LevelOne ProCon GSW-2496 - Manual (Page 134)

126
3-17. Alarm Configuration
Function name:
Events Configuration
Function description:
The Trap Events Configuration function is used to enable the switch to send out
the trap information while pre-defined trap events occurred. The switch offers
23 different trap events to users for switch management. The trap information
can be sent out in three ways, including email, mobile phone SMS (short
message system) and trap. The message will be sent while users tick (
;) the
trap event individually on the web page shown as below.
Parameter description:
Trap: Cold Start, Warm Start, Link Down, Link Up, Authentication
Failure, User login, User logout
STP: STP Topology Changed, STP Disabled, STP Enabled
LACP: LACP Disabled, LACP Enabled, LACP Member Added, LACP
Port Failure
GVRP: GVRP Disabled, GVRP Enabled
VLAN: VLAN Disabled, Port-based VLAN Enabled, Tag-based VLAN
Enabled, Metro-mode Vlan Enabled, Double-tag Vlan Enabled
Module Swap: Module Inserted, Module Removed
Events Configuration
Email/SMS Configuration
Alarm Configuration