Lexmark P200 User Manual
Page 23

S
OLUTION
2
1
Remove the printer software CD.
2
Restart the computer.
3
When the desktop appears, cancel all Found New Hardware windows.
4
Reinsert the printer software CD.
5
Follow the instructions on the computer screen.
S
OLUTION
3
1
Check the USB cable for any obvious damage.
2
Firmly plug the square end of the USB cable into the back of the printer.
3
Firmly plug the rectangular end of the USB cable into the USB port of the computer.
The USB port is marked with the
USB symbol.
S
OLUTION
4
1
Disconnect the USB cable from any other device, such as a USB hub or switch box.
2
Directly connect the cable to the printer and the computer.
Cannot print from a digital camera using PictBridge
S
OLUTION
1
Enable PictBridge printing on the camera by selecting the correct USB mode. For more information, see the digital
camera documentation.
S
OLUTION
2
1
Disconnect the camera.
2
Connect a PictBridge-enabled digital camera to the PictBridge port. See the digital camera documentation to
determine whether it is PictBridge-enabled.
S
OLUTION
3
Use only the USB cable that came with the camera.
Lexmark Confidential until announced
Troubleshooting
23