Achieving better print quality, Improving print quality, Aligning the print cartridge – Lexmark P200 User Manual
Page 19

Achieving better print quality
Improving print quality
If you are not satisfied with the print quality of a photo, make sure you:
•
Use the appropriate paper for the photo. For best results, use Lexmark Perfectfinish Photo Paper or Lexmark Photo
Paper.
Note: Do not use Lexmark Premium Photo Paper. Your print cartridge is not compatible with this type of paper.
•
Load the paper with the glossy or printable side facing you. (If you are not sure which side is the printable side,
see the instructions that came with the paper.)
•
Select Photo as the print quality.
Note: To prevent smudging or scratching, avoid touching the printed surface with your fingers or sharp objects. For
best results, remove each printed sheet individually from the paper exit tray, and allow the prints to dry at least 24
hours before stacking, displaying, or storing.
If the photo still does not have the print quality you want, follow these steps:
1
2
page 20.
If print quality has not improved, continue to step 3.
3
page 17 and “Installing the print cartridge” on page 17.
If print quality has not improved, continue to step 4.
4
contacts” on page 20.
If print quality is still not satisfactory, replace the print cartridge. For more information, see “Ordering supplies”
Aligning the print cartridge
The printer automatically aligns the print cartridge after the cartridge is installed. Make sure that you have loaded
photo paper in the printer.
You may also align the print cartridge from the computer.
1
Load photo paper.
2
Open the Solution Center.
3
From the Maintenance tab, click Align to fix blurry edges.
4
Click Print.
If you aligned the cartridge to improve print quality, print your document again. If print quality has not improved,
clean the print cartridge nozzles.
Lexmark Confidential until announced
Maintaining the printer
19