Lucent Technologies Network Access Module - Manual (Page 43)

Using PMVision 6-3
Communicate with the INA Module
Figure 6-1 PMVision Main Screen
Communicate with the INA Module
Select Device from the menu bar, and click Connect to establish communications
between PMVision and your INA module. The connection dialog box appears
(Figure 6-2). Enter the IP address or Domain Name System (DNS) name of the INA
module into the device text box. If you have connected to this INA module before, you
can also select the address from the drop-down list box. Complete the dialog by
completing the Username and Password text boxes and clicking Connect.
main panel
connection panel
control tree
panel
menu bar
status bar help bar