Lexmark 2400 - Manual (Page 11)

11
Loading a cut form or envelope manually
1 Clear the paper path.
2 If continuous forms are currently loaded, tear off any used forms and
press Load/Unload to park the continuous forms.
The Paper Out light is blinking.
3 Set the forms thickness lever.
For help, see “Setting the forms thickness lever” on page 7.
4 Move the paper select lever up to cut forms .
5 Open the manual feed door.
6 Set the left margin.
Move the left paper guide so that the print start position you want aligns
with the [A symbol printed on the margin guide.
7 Place a cut form or envelope against the left paper guide.
8 Move the right paper guide against the right edge of the paper.
9 Insert paper into the printer until the Paper Out light stops blinking.
a If Auto Cut Sheet Load is set to On, the paper feeds automatically to
the Top-Of-Form.
b If Auto Cut Sheet Load is set to Off, press FormFeed.
10 Printer is online (Ready light On solid).
If it is not, press Start/Stop until the Ready light is On solid.