Land Pride RC5515 - Manual (Page 6)

4
Important Safety Information
RC5515 & RC6515 (540 RPM) RCM5515 & RCM6515 (1000 RPM) Rotary Cutter 318-721M 5/29/13
Table of Contents
Safety Labels
Your Rotary Cutter comes equipped with all safety labels in
place. They were designed to help you safely operate your
implement. Read and follow their directions.
1. Keep all safety labels clean and legible.
2. Refer to this section for proper label placement. Replace
all damaged or missing labels. Order new labels from your
nearest Land Pride dealer. To find your nearest dealer,
visit our dealer locator at www.landpride.com.
3. Some new equipment installed during repair requires
safety labels to be affixed to the replaced component as
818-840C
Danger: Rollover Hazard
Left side only
22143
818-130C
Caution! Use 540 rpm PTO only (RC Series Cutters)
818-240C
Caution! Use 1000 rpm PTO only (RCM Series Cutters)
818-276C
Warning! Rotating Blade Hazard
Left Side Only
TRACTOR MUST HAVE SAFETY GUARDING
22143
22143
specified by Land Pride. When ordering new components
make sure the correct safety labels are included in the
request.
4. Refer to this section for proper label placement.
To install new labels:
a.
Clean the area the label is to be placed.
b. Spray soapy water on the surface where the label is to
be placed.
c. Peel backing from label. Press firmly onto the surface.
d. Squeeze out air bubbles with the edge of a credit card
or with a similar type straight edge.