Linksys SPA-941 - Manual (Page 61)

Managing the Selective Caller List
Linksys SPA-941 Telephone User Guide System Telephone Features 49
620-05600390
A voice prompt tells you whether Privacy Guard is enabled or disabled and
then gives the menu choices.
3. Press 2 to set or change the 3-digit Access Code.
4. Enter the Access Code by pressing the desired digit keys on the telephone
keypad.
5. Press # to save the entry or * to exit without saving.
6. Select a menu item or hang up.
Listening to Access Code
1. Press *88 on the telephone keypad.
2. Press the dial soft key or pick up the handset.
A voice prompt tells you whether Privacy Guard is enabled or disabled and
then gives the menu choices.
3. Press 3 to hear the 3-digit Access Code.
4. Listen to the Access Code.
5. Select a menu item or hang up.
Managing the Selective Caller List
Your 10-digit Selective Call List access codes are managed using the keypad on
your telephone. You can change the codes at any time and can listen to the
numbers you have programmed. You can delete numbers from the list which will
end their ability to call you, change the numbers, or to remove an old or no longer
used number so you can add new numbers.
Adding to the List
1. Press *88 on the telephone keypad.
2. Press the dial soft key or pick up the handset.
A voice prompt tells you whether Privacy Guard is enabled or disabled and
then gives the menu choices.
3. Press 4 to add numbers to the Selective Call List.
4. Enter the number by pressing the desired digit keys on the telephone keypad.
5. Press # to save the entry or * to exit without saving.
6. Select a menu item or hang up.
NOTE: If you try to add a number when you already have 10 numbers, a prompt tells you
the list is full, no more numbers can be added and that a number must be deleted
to add a new number.