Dialing in too early, Entering an incorrect id, Dialing in too early entering an incorrect id – Linksys SPA-941 User Manual
Page 48
Meet-Me Conference
36
System Telephone Features
Linksys SPA-941 Telephone User Guide
Dialing In Too Early
If you dial the Meet-Me Conferencing number more than five minutes prior to the
scheduled conference call time, you will hear the following message and the
system will then disconnect:
“Your conference is not scheduled to start until (time) on (day, date). Please
call back at that time.”
Entering an Incorrect ID
If you enter the wrong Guest or Moderator ID, the system informs you the
conference you wish to join could not be found and prompts you to press 1 to re-
enter the conference ID or press the * key to end the call.
If you pressed 1, do the following:
1.
Enter the ID of the conference you wish to join.
2.
Press the # key.
Another participant joins
the conference.
You were listening to the
First Caller announcement
when silence was started.
You will be connected to
the conference.
You are the moderator.
You perform any floor
control operation.
You will be prompted with
the appropriate
announcement and
connected to the
appropriate announcement
based on the conference
state.
The Start Soon
announcement was playing
when silence was started.
The moderator mutes or
unmutes you.
You will hear the Starts
Soon announcement.
The conference bridge
state changes for some
reason.
N/A
You will hear the Starts
Soon, First Caller or Ends
Soon announcement
depending on the
conference reservation
state.
When...
And if...
Then