LSI U40HVD - Manual (Page 55)

LSIU40HVD PCI to Dual Channel SCSI Host Adapter A-1
Appendix A
Technical
Specifications
This section discusses the physical environment associated with the
LSIU40HVD. An example of the LSIU40HVD mechanical drawing is
shown in
Figure A.1 . This section also includes these topics:
•
Section A.1, “Physical Environment,” page A-1
•
Section A.2, “Operational Environment,” page A-4
A.1 Physical Environment
This section discusses the physical, electrical, thermal, and safety
characteristics associated with the LSIU40HVD. The board is compliant
with the electromagnetic standards set by the FCC.
A.1.1 Physical Characteristics
The dimensions of the LSIU40HVD are 190 x 96.52 mm (7.50 x 3.80
inches). PCI connection is made through the edge connector J1. Internal
16-bit SCSI connection is made through the 68-pin high density
connectors J2 or J5. External SCSI connection is made through the
68-pin high density connectors J3 or J6. The J3 and J6 connectors
extend through the ISA/EISA bracket, which is attached to the face of the
connector outside of the cabinet where the LSIU40HVD is installed. The
bracket is a standard ISA type with a cutout to accommodate the
connectors. The J4 and J7 connectors are for connecting the computer’s
Busy-LED. It is a 4-pin, one-row right-angle header wired in parallel with
the onboard LED. The component height on the top and bottom of the
board follows the PCI specification.