Figure2.3 scsi cables, 1 making internal scsi bus connections, Scsi cables – LSI U40HVD User Manual
Page 24: Figure 2.3
2-8
Installing the LSIU40HVD
Figure 2.3
SCSI Cables
2.2.3.1
Making Internal SCSI Bus Connections
This section provides step-by-step instructions about making internal
SCSI bus connections:
Step 1.
If you are connecting an internal SCSI device, plug the 68-pin
connector on one end of a wide internal SCSI ribbon cable into
the connector J2, or J5 (see
SCSI Cables for Internal Connections
SCSI Cable for External Connections
68-pin High Density
68-pin VHDCI