LSI U40HVD - Manual (Page 48)

3-8 Configuring the LSIU40HVD
3.2.2.1 Adapter Setup Menu
When you select Adapter Setup , the corresponding menu appears.
Figure 3.6 is an example of the Adapter Setup Menu.
Figure 3.6 Adapter Setup Menu
The settings in this menu are global settings that affect the selected host
adapter and all SCSI devices attached to it. One of these choices can
be selected by highlighting it and pressing
Enter .
SCAM Support – The LSI Logic BIOS version 4.0 and above supports
the SCSI Plug and Play protocol called SCAM (SCSI Configured
AutoMatically). SCAM support by default is off in versions 4.09 and later
for the LSI53C876 device. The user may choose to turn this on only if
the system drivers do not require SCAM off. Note that if this BIOS is
flashed onto a board with existing settings, then these settings will not
be changed to reflect the new BIOS defaults. Go into the Configuration
Utility to change these settings.
Parity – The LSI Logic PCI to SCSI host adapters always generate
parity, but some older SCSI devices do not. Therefore, you are offered
the option of disabling parity checking.
Adapter Setup
SCAM Support Off
Parity Enabled
Host SCSI ID 7
Scan Order Low to High <0..Max>
Removable Media Support None
CHS Mapping SCSI Plug & Play Mapping
Spinup Delay 2
Help
Restore Default Setup
Exit this menu