LOREX Technology LW2301 User Manual
Page 39
Using the Main Menu
35
Trigger Record
Use the Trigger Record menu to set the length of the time for the system to record after motion
is detected by a camera.
To change the motion recording time:
1. From the Main Menu select Record and press the Enter/OK button.
2. From the Record menu select Trigger Record and press the Enter/OK button.
3. Select 5 seconds, 15 Seconds or 30 Seconds and press the Enter/OK button.
4. Press the MENU button until all menu windows are closed.
Figure 10.2 Trigger Record menu