LOREX Technology LW2301 - Manual (Page 13)

Wireless Receiver
9
Wireless Receiver
Top Panel
1. CHANNEL: Press M to change channels 1~4 manually; press A to enable Auto Sequence Viewing
Mode.
2. RECORD: Press M to start Manual Recording; press M again to stop. Press A to start Motion
Recording; press A again to stop.
NOTE: The date and time must be set on the system prior to using Schedule Recording. For
details, see “Setting the Time” on page 20.
3. Channels, OK: QUAD MODE ONLY—Press 1 to view camera 1, 2 to view camera 2, 3 to view
camera 3, and 4 to view camera 4; press OK to enter/confirm menu selections.
NOTE: The OK button serves the same function as the Enter button on the remote control.
4. Quad: Press to change display view to Quad (4-way); press again to exit.
5. MENU: Press to open the Main Menu, cancel/exit, or go to the previous page.
6. Del.: Press to delete files on the SD card
7. LED Indicators: LED indicators for camera and receiver operations. For details, see “LED
Indicators on the Wireless Receiver” on page 15.
1
2
6
5
4
3
7