Land Pride RCM6015 User Manual
Page 30
28
Section 5: Maintenance & Lubrication
RC5015 & RC6015 (540 RPM) and RCM5015 & RCM6015 (1000 RPM) Rotary Cutters 318-047M
8/28/08
Land Pride
Step 2
Tighten the four hex nuts
uniformly until the clutch pack
and hub are loose.
Step 3
Bend all four retaining lugs
out on edge of clutch housing.
Step 4
Remove thrust plate with
Belleville Springs and lug
rings to access friction discs
and hub for inspection or
service.
4-Plate Disassembly
Step 1
If included, remove end half
clamps.
Step 5
Inspect friction discs and hub.
23553
4-Plate Assembly
Step 2
Compress Belleville Springs
to the pressure plate by
tightening the four hex nuts
and then placing the
assembly into the clutch
housing.
Step 3
Bend retaining lugs inward
over the Belleville Spring
edges to secure the spring
before backing the four hex
nuts off.
Step 4
With lugs bent in, loosen the
four hex nuts completely to
the end of the threaded studs.
Step 5
Install end half clamps if
available.
Step 1
Place hub and friction discs
into the housing.
23553