beautypg.com

Before calling for service – LG Electric Range LSE3092ST User Manual

Page 49

background image

49

ENGLISH

BEFORE CALLING FOR SERVICE

(cont')

T RO U B L E S H O OT I N G

Problem

Excessive smoking
during a self clean
cycle

Oven door do not
open after a self clean
cycle

Oven not clean after a
self clean cycle

CLEAN and door flash
in the display

LOCKED is on in the
display when you
want to cook

Burning or oily odor
emitting from the vent

Oven racks are
difficult to slide

Oven door will unlock
after selfclean cycle

Moisture collects on
oven window or
steam comes from
oven vent.

• Excessive soil.

- Press the CLEAR/OFF pad. Open the windows to rid the room of smoke. Wait

until the self clean mode is cancelled. Wipe up the excess soil and reset the
clean.

• Oven is too hot.

- Allow the oven to cool below locking temperature.

• Oven controls not properly set.

- See the Self Clean section, page 38.

• Oven was heavily soiled.

- Clean up heavy spillovers before starting the clean cycle. Heavily soiled ovens

may need to self clean again or for a longer period of time.

• The self clean cycle has been selected but the door is not closed.

- Close the oven door.

• The oven door is locked because the temperature inside the oven has not dropped

below the locking temperature.

- Press the CLEAR/OFF pad. Allow the oven to cool.

• This is normal in a new oven and will disappear in time.

- To speed the process, set a self clean cycle for a minimum of 3 hours.

See the self clean section, page 38.

• The shiny, silver-colored racks were cleaned in a self clean cycle.

- Apply a small amount of vegetable oil to a paper towel and wipe the edges of the

oven racks with the paper towel.

• Oven interior is still hot. Allow about one hour for the oven to cool after the

completion of a self clean cycle. The door can be opened when the LOCK indicator
word is not displayed.

• The control and door may be locked. See pages 37 to unlock.

• This is normal when cooking foods high in moisture.
• Excessive moisture was used when cleaning the window.

Possible Causes / Solutions