LG Electric Range LSE3092ST - Manual (Page 44)

To remove the door:
Step. 1
Open the door fully.
Step. 2
Pull the hinge locks up
toward the door frame to
the unlocked position.
Step. 3
Firmly grasp both sides of the door at the top.
Step. 4
Close door to the door removal
position, which is approximately
5 degrees.
Step. 5
Lift door up and out until the hinge arm is clear of the
slot.
To replace the door:
Step. 1
Firmly grasp both sides of the door at the top.
Step. 2
With the door at the
same angle as the
removal position,
seat the indentation
of the hinge arm
into the bottom
edge of the hinge
slot. The notch in
the hinge arm must
be fully seated into
the bottom edge of
the slot.
Step. 3
Open the door fully. If the door will not open fully, the
indentation is not seated correctly in the bottom edge
of the slot.
Step. 4
Push the hinge locks down
against the front frame of the
oven cavity to the locked
position.
Step. 5
Close the oven door.
44
REMOVING & REPLACING THE LIFT-OFF OVEN DOOR
M A I N T E N A N C E
CAUTION
• Be careful when removing and lifting the door.
• DO NOT lift the door by the handle.
- The door is very heavy.
Slot
Hinge
lock
Lock
Unlock
Hinge arm
Indentation
Bottom
edge of
slot
Hinge arm
Hinge lock
about 5°
DOOR CARE INSTRUCTIONS
• Most oven doors contain glass that can break.
Read the following recommendations:
1. Do not close the oven door until all the oven racks
are fully in place.
2. Do not hit the glass with pots, pans, or any other
object.
3. Scratching, hitting, jarring, or stressing the glass
may weaken its structure causing an increased risk
of breakage at a later time.