Lanier 5635 - Manual (Page 213)

Scanning Originals
Document Server 8 - 9
To Set the File Name
1
Touch the File Name key.
2
Enter the new file name using
the letter keys on the display
panel.
Note: You can enter up to 8
letters.
Note: To switch to the
capital letter mode or small
letter mode, press the Upper
Case or Lower Case key.
Note: To change the letter entered, press the Back Space, Clear, or Clear/Stop key
and enter new letters. To delete the entered letters in 1 letter steps, press the
BackSpace key. To delete all the entered letters, press the Clear or Clear/Stop key.
3
Touch the OK key.
Note: If you do not wish to enter a password, go to step 4.
To Set User Name
1
Press the [User Name] key.
2
Enter the new user name using
the letter keys on the display
panel