Lanier 5635 - Manual (Page 202)

Using the Finisher Option
7 - 6 Using Finisher/Sorters
Selecting Punch Mode
Note: The optional finisher and bridge unit must be installed to use this function.
1
Touch the Punch key.
2
Enter the number of copy sets.
3
Set the originals in place, then
press the Start key. Your copies
will exit on the Finishers Shift
Tray with holes punched in
them.
4
Press the Start key.
5
To remove the paper punch outs from the finisher, refer to “Removing Chad” on page 9-20
With the optional punch installed, you can have three holes punched into your copy sets.