Lanier 5635 - Manual (Page 33)

Using Auto Start
Copier Functions 3 - 5
Using Auto Start
1
Place the original document in the Document
Feeder or on the Exposure Glass.
2
Make your copy requirement selections.
3
Press the Start key.The indicator light in the
Start key flashes alternately green and red.
4
The copier automatically begins copying
when the copier comes to its Ready
condition.
When the copier comes to its Ready
condition, the indicator light in the Start key
turns green.
Note: To cancel Auto Start, press the
Clear/Stop key.
When the copier is first turned ON, it takes five and one-half minutes for it to warm-up and
come to its Ready condition. During this time, you can set up your copy job, press the Start key
and walk away. You can even do this while your copier is in the Energy Saver mode. When the
copier comes to its Ready condition, it automatically copies your job.