Lanier 5635 - Manual (Page 119)

General Features 1 of 2
User Tools Settings 5 - 3
General Features 1 of 2
Panel Tone
The beeper (key tone) sounds when a key is pressed.
Default: ON
Warm Up Notice
Specify whether the beeper sounds when the machine becomes ready for copying after Energy
Saver mode is deactivated or the power is turned on.
Note: If the “Panel Tone” setting is “Off”, the beeper does not sound irrespective
of the “Warm Up Notice” setting.
Default: ON
Copy Count Display
The copy counter can be set to show the number of copies made (count up) or the number of
copies remaining to be made (count down).
Default: Up (count up)
Function Priority
You can specify the mode to be displayed immediately after the operation switch is turned on or
System Reset mode is turned on.
Default: Copier
Print Priority
Set print priority for each mode.
•
“Display mode”: Print priority is given to the mode displayed on the display.
•
“Copier”: Print priority is given to the copy function.
•
“Document Server”: Print priority is given to the Document server.
•
“Facsimile”: Print priority is given to the fax function.
•
“Printer”: Print priority is given to the printer function.
•
“Interleave”: Prints jobs in the order in which they are initiated regardless of mode/
function. Output from each function might be mixed. If you want to avoid such mixing,
specify an independent tray for each feature using “Output tray Prio”. When using
different functions, attaching internal tray 2 allows you to specify an independent tray
for each function. If you want to attach one, contact your local dealer.
Default: Display mode