Lexmark OptraImage 232 - Manual (Page 34)

34 OptraImage Setup Guide
Lexmark does not currently know of any interoperating difficulties for the
following countries:
Using the MarkNet
print server in
Germany
The MarkNet print server requires a German billing tone filter
(P/N 14B5123) to be installed on any line which receives metering
pulses in German.
The subscriber may request that metering pulses be placed on the line,
or can have them removed by calling the German network provider.
Normally, metering pulses are not provided unless specifically
requested by the subscriber at the time of installation.
Using the MarkNet
print server in
Switzerland
The MarkNet print server requires a Switzerland billing tone filter (P/N
14B5109) to be installed on all equipment used in Switzerland since
metering pulses are present on all analog lines.
Austria Belgium Denmark Finland
France Germany Luxemburg Netherlands
Greece Iceland Ireland Italy
Portugal Sweden United Kingdom Switzerland
Spain Norway