LSI 21003 User Manual
Page 60
3.75 pc
10.25 pc
11.25 pc
38.25 pc
4.333 pc
48.583 pc
52.5 pc
34.5 pc
44.25 pc
A-6
Glossary of Terms and Abbreviations
SCAM
SCSI Configured AutoMatically. A method to automatically allocate SCSI
IDs using software when SCAM compliant SCSI devices are attached.
SCSI
Small Computer System Interface. A specification for a high-performance
peripheral bus and command set. The original standard is referred to as
SCSI-1.
SCSI-2
The SCSI specification which adds features to the original SCSI
standard.
SCSI-3
The current SCSI specification which adds features to the SCSI-2
standard.
SCSI Bus
A host adapter and one or more SCSI peripherals connected by cables
in a linear chain configuration. The host adapter may exist anywhere on
the chain, allowing connection of both internal and external SCSI
devices. A system may have more than one SCSI bus by using multiple
host adapters.
SCSI Device
Any device that conforms to the SCSI standard and is attached to the
SCSI bus by a SCSI cable. This includes SCSI host adapters and SCSI
peripherals.
SCSI ID
A way to uniquely identify each SCSI device on the SCSI bus. Each SCSI
bus has eight available SCSI IDs numbered 0 through 7 (or 0 through 15
for Wide SCSI). The host adapter usually gets the highest ID, (7 or 15)
giving it priority to control the bus.
SCSI SCRIPTS
A SCSI programming language that works with the SCRIPTS processor
that is embedded on the LSI53C1010-33 device. These SCRIPTS reside
in the host computer system memory.
SCRIPTS
Processor
The SCRIPTS processor allows users to fine tune SCSI operations with
regard to unique vendor commands or new SCSI specifications. The
SCRIPTS processor fetches SCRIPTS instructions from system memory
to control operation of the LSI53C8XX device.
SDMS
Storage Device Management System. An LSI Logic software product that
manages SCSI system I/O.
Single-Ended
(SE) SCSI
A hardware specification for connecting SCSI devices. It references each
SCSI signal to a common ground. This is the most common method (as
opposed to differential SCSI which uses a separate ground for each
signal).