This section provides quick setup instructions for the experienced
computer user with prior host adapter installation and SCSI bus setup
experience. If you prefer more detailed guidance for installing the
LSI21003, please follow the instructions in

Section 2.2, “Detailed

Installation Procedure.”

For safe and proper installation, check the user’s manual that was
supplied with your computer and perform the following steps.

Step 1.

Ground yourself before handling the host adapter board.

Note:

The use of a static ground strap is recommended.

Step 2.

Remove the LSI21003 from the packing and check that it is not
damaged.

Step 3.

Switch off and unplug the system.

Step 4.

Remove the cabinet cover on your computer to access the PCI
slots.

Step 5.

Locate the slots for the PCI plug-in board installation.