Lanier LD 035 - Manual (Page 26)

Placing Originals
11
1
BBBB
Select the original orientation.
Standard orientation
A Make sure that
is select-
ed.
90
° turn
A Place your original in the land-
scape orientation, and then
press
.
CCCC
Press [OK].
Placing Originals on the
Exposure Glass
AAAA
Lift the exposure glass cover or
the ADF.
Important
❒ Do not lift the exposure glass
cover or the ADF forcefully.
Otherwise, the cover of the ADF
might open or be damaged.
Note
❒ Be sure to lift the exposure glass
cover or the ADF by more than
30
°. Otherwise, the size of the
original might not be detected
correctly.
BBBB
Place the original face down on
the exposure glass. The original
should be aligned to the rear left
corner.
1. Reference mark
2. Left scale
Note
❒ Start with the first page to be
copied.
CCCC
Lower the exposure glass cover or
the ADF.
AdonisC3_GBcopyF_FM1.book Page 11 Thursday, November 28, 2002 1:53 PM