Lanier LD 035 - Manual (Page 19)

4
Control Panel
Note
❒ This illustration shows the control panel of the machine with options fully in-
stalled.
1. Screen Contrast knob
Adjusts the brightness of the display pan-
el.
2. Indicators
These indicators show the status of the
machine or indicate errors.
•
d: Add Staple indicator
• D: Add Toner indicator
• B: Load Paper indicator
•
L: Service Call indicator
•
M: Open Cover indicator
• x: Misfeed indicator
See “Control Panel”, General Settings
Guide.
3. {{{{User Tools/Counter}}}} key
• User Tools
Press to change the default and condi-
tions to meet your requirements.
• Counter
Press to check or print the counter val-
ue.
4. Display panel
Shows operation status, error messages,
and function menus.
5. {{{{Check Modes}}}} key
Press to check the entered copy job set-
tings.
6. {{{{Program}}}} key
Press to select the program mode. See
p.74 “Programs”.
7. {{{{Clear Modes}}}} key
Press to clear the previously entered copy
job settings.
8. {{{{Energy Saver}}}} key
Press to switch to and from the Energy
Saver mode. See General Settings Guide.
9. {{{{Interrupt}}}} key
Press to interrupt a long copy job to make
copies. See p.16 “Interrupt Copy” .
10. Main power indicator
The main power indicator goes on when
you turn on the main power. The power
indicator lights when the power is on.
Important
❒ Do not turn off the main power
switch while the power indicator
goes on or is flashing. The hard
disk may malfunction.
AdonisC3_GBcopyF_FM1.book Page 4 Thursday, November 28, 2002 1:53 PM