Konica Minolta Konica Digital Revio KD-400Z - Manual (Page 54)

54
Using the REC Menu
(Cont’d)
Using the Digital Zoom
- Digital zoom can double the largest zoom ratio achieved by the optical zoom.
- When using the digital zoom, view the field through the LCD monitor.
Because the zoom effect is accomplished electronically, it is not possible
to use the viewfinder.
- When shooting movies, the digital zoom function is not available.
1. Select “DIGITAL ZOOM” and press
̈
.
2. Use
̄
or
̆
to select “ON”, then press either
̈
or the MENU/SET button. The setting is
completed and you will return to screen 1.
• If you press
̇
, the selection is invalidated and
you will return to screen 1.
3. From screen one, when you press
̇
, you will
return to the through image mode. To take a
picture, press the TELE zoom button until it
reaches the end of the optical range, then
release the button for a moment, then press
and hold the TELE zoom button and the digital
zoom is engaged. Use the LCD monitor to
compose your photo, and take your photos.
• The LCD monitor will display the digital zoom
ratio (
×
2).
• To return to normal mode, press the WIDE zoom
button.
3
1
2