Konica Minolta Konica Digital Revio KD-400Z - Manual (Page 110)

110
Check this: Page
• Battery level too low 19
• Battery inserted incorrectly 19
• AC Adaptor attached incorrectly 22
• Battery level too low 19
• Low ambient temperature 113
• Power supply not on. 23
• SD Memory Card or Memory Stick’s
write protected. 13
• Pictures taken have reached the
maximum number.
→
Erase unwanted pictures. 68,74
• Set to the Self-Timer mode. 40
• Flash being charged. 38
• Subject not in the center 33
• Subject hard to focus 33
• Dirty lens 30
• Incorrect distance from the subject 31
• LCD brightness adjusted incorrectly 46,77
• Finger prints or dirt on the monitor 109
• Set to “Flash off” mode 39
- If the following does not solve your problem, please contact the point of
purchase.
Troubleshooting
Symptom
Power will not turn ON
Power turns OFF right
after turning on
Can’t take a picture
even if pressing the
shutter button
Can’t focus
LCD monitor display
and images are not
clear
Doesn’t Flash
Power
Supply
Shooting
the
pictures