Acks, Midi j, Usb j – Kawai CN4 User Manual
Page 50: Line out j, Line in j, Headphone j
46
KAWAI DIGITAL PIANO CN4
Jacks
MIDI J
ACKS
These jacks are used to connect external MIDI devices with the CN piano.
There are three terminals: MIDI IN, MIDI OUT, and MIDI THRU.
USB J
ACK
This jack is used to connect with a personal computer and exchange MIDI
data.
LINE OUT J
ACKS
These jacks provide stereo output of the piano’s sound to amplifiers, tape
recorders or similar equipment.
The audio signal coming through the LINE IN jacks is also routed to these
jacks. The piano’s sound is mixed with the LINE IN signals.
The CN piano’s VOLUME slider can control the output level of its own
sound while it does not control the LINE IN signal.
LINE IN J
ACKS
These jacks are used to connect a pair of stereo outputs from other audio
equipment or electronic instruments to the piano’s speakers.
The audio signal coming through these jacks bypasses the piano’s volume
control. To adjust the volume level, use the output control of the external
device.
HEADPHONE J
ACKS
There are two jacks for headphones provided at the left end on the bottom
of the piano.
You can hear the piano’s sound as well as any audio signal that is coming
through the LINE IN.
9. J
ACKS
BOTTOM VIEW