Changing the split point – Kawai CN4 User Manual

Page 14

KAWAI DIGITAL PIANO CN4

First press the desired SOUND SELECT button to select the upper

sound. Then, while holding down the SPLIT button, press the

desired SOUND SELECT button to select the lower sound.

The

LED Indicator for the upper sound will be turned on and the LED for the

lower sound will start flashing.

The LCD Display shows you which sounds are
selected for the upper and lower sections.

CHANGING THE SPLIT POINT

The default split point is set between B2 and C3. This point can be moved

to anywhere on the keyboard.

Press the desired key while holding down the SPLIT button.

The LCD Display shows you which key you pressed

The key you pressed becomes the lowermost note for the upper section.

2.4 B

ALANCE

LIDER

You can adjust the volume balance between the two sounds in Dual or

Split mode. Use the BALANCE slider to adjust the balance. Move

the slider to the right to increase the volume of the sound shown on the

top line of the display and decrease the volume of the sound shown on

the bottom line of the display. The balance changes in the opposite way

when the slider is moved to the left.

2.5 E

FFECTS

EVERB

You might have noticed that when you select some of the preset sounds,

the LED indicator for the EFFECTS or the REVERB is turned on. The

reason for this is some of the preset sounds are set up with an effect on as

their initial setting.

Adding an effect to the sound enhances tonal quality and improves

acoustical realism. The CN piano is provided with two separate groups

of effects. The first is reverb and the second contains chorus, flanger,

delay, tremolo and rotary speaker.

REVERB

Reverb adds reverberation to the sound, simulating the acoustic

environment of a recital room, stage, or concert hall. There are six types

of reverb available. They are Room 1&2, Stage, Hall 1&2 and Plate.

SplitPoint=C2

Studio Grand
/Jazz Organ