Kawai CN4 - Manual (Page 33)

29 DISK OPERATIONS
Disk Operations
MUTING A PART
You can mute each part separately. Press one of the VALUE buttons.
The LCD display will show the part mute screen.
Move the cursor by using the MENU buttons and use the VALUE
buttons to switch between play and mute.
: The part is played.
X : The part is muted.
— : The part is empty.
◆ NOTE
The LCD display will automatically return to the previous screen after
two seconds if no buttons are pressed.
RECORDING A SONG
You can also record a song with up to 16 parts on a floppy disk. Insert a
floppy disk in the drive and press the DISK button. Press the
VALUE UP button to go to the Disk Recorder mode. If the disk is
empty, then an empty song will automatically be selected and the LCD
display will show “EmptySong”.
“EmptySong” is selected.
◆ NOTE
If the disk already contains any song files, after the first file is selected
pressing the MENU DOWN button will select “EmptySong”.
Press the REC button. The LCD display will show the part selection
screen.
The LCD display shows which part will be recorded.
Use the VALUE buttons to select a part to record.
◆ NOTE
Part 10 is reserved as the Drum track. When you select Part 10, you can
record Drum sounds only. Drum sounds can only be recorded on Part 10,
you can not choose Drum Sounds to be recorded on any other part.
◆ NOTE
When the Rec Part is set to MIDI, any MIDI data coming in via MIDI IN
jack is recorded in Parts 1 through 16 according to MIDI channel.
123456789
X--- X ------
Empty_Song
Bar= 1- 1 =120
Rec Part= 1
Bar= 1- 1 =100