Kawai CN4 - Manual (Page 29)

25 RECORDER
Recorder
STATUS OF SONG AND PART
In the LCD display an asterisk (*) after the part number means that the
part has been already recorded.
“ *” indicates that this part has already been recorded.
5.2 P
LAYING
B
ACK A
S
ONG
(PLAY/STOP B
UTTON
)
The PLAY/STOP button is used to select a song and part to play, and to
start and stop play back of the recorded songs.
Press the PLAY/STOP button one time to select a specific song
and part you would like to play back. Use the MENU buttons to
select a song and use the VALUE buttons to select a part.
The LCD Display shows that both parts of song 1
are selected to play back
Press the PLAY/STOP button again and the recorded song will start
playing.
The LCD Display shows that the selected song is
playing.
Press the PLAY/STOP button again to stop play back and return to
the song select display.
Pressing the REW button rewinds the song and pressing the FF button
forwards the song. The bar number and beat number are shown in the
display. Press the RESET button to go back to the beginning of the song.
PLAYING BACK THE PARTS SEPARATELY
While you are in the playback menu, use the VALUE buttons to
select the desired part number you want to listen to.
An asterisk indicates that the part has been recorded.
You can select between, “Part 1”, “Part 2”, and “Part 1&2”. To check that
you have recorded on both tracks, select “Part 1”, then select “Part 2”.
You will see an asterisk after each part, this means you have successfully
recorded both parts.
Song3 Part=1&2*
Bar= 1- 1 =120
Song1 Part=1&2*
Bar= 1- 1 =120
Playing
Bar= 2- 1 =120
Song3 Part=2*
Bar= 1- 1 =120