Kawai CN4 - Manual (Page 41)

37 TOUCH, TRANSPOSE AND MENU BUTTONS
Touch, T
ranspose
and Menu Buttons
The LCD display shows the lower part is shifted one
octave up.
Lower Octave Shift can be set between 0 to 3.
3. LOWER PEDAL ON/OFF
This determines if the sustain pedal will be active for lower sound when
in SPLIT mode. The default setting is Off which means the sustain pedal
is not active for the lower sound.
After selecting the “Lower Pedal” function by pressing the MENU
buttons, use the VALUE buttons to turn it on and off.
The LCD display shows whether Lower Pedal is on
or off.
4. LAYER OCTAVE SHIFT
This allows the octave of the layered part to be shifted up or down when
you use the dual function.
After selecting the “Layer Octave Shift” function by pressing the
MENU buttons, use the VALUE buttons to select your desired shift
range .
The LCD display shows the layered part is shifted
one octave up.
Layer Octave Shift can be set between -2 to 2.
5. LAYER DYNAMICS
In Dual mode sometimes simply adjusting the volume balance between
the two layered sounds is not enough to create the desired sound character
if both sounds are very dynamic. Two equally dynamic sounds can be
difficult to control and play comfortably. The Layer Dynamics function
allows you to limit the overall dynamic sensitivity of the layered sound to
create a perfect blend between both sounds in a layer. In addition to
reducing the volume of the layered sound, limiting the dynamic sensitivity
of the layered sound also makes the layered sound easier to control in
relation to the main sound as you play. With this function, you can
comfortably play as dynamically as you like with the main sound while
maintaining control of the layered sound.
After selecting the “Layer Dynamics” function by pressing the
4 LayerOctShift
= 1
3 Lower Pedal
= On
2 LowerOctShift
= 1