Kenwood DPX502 User Manual
Page 4
4
|
English
Notes
• If you experience problems during installation,
consult your Kenwood dealer.
• When you purchase optional accessories, check with
your Kenwood dealer to make sure that they work
with your model and in your area.
• We recommend the use of Code> (page 24) to prevent theft. • The RDS feature won’t work where the service is not supported by any broadcasting station. • The characters which can be displayed by this unit are A-Z 0-9 @ " ‘ ` % & * + – = , . / \ < > [ ] ( ) : ; ^ - { } | • The illustrations of the display and the panel appearing in this manual are examples used to How to reset your unit • If the unit fails to operate properly, press the Reset button. The unit returns to factory settings when the • Remove the USB device before pressing the Reset button. Pressing the Reset button with the USB • Press the reset button if the disc auto changer fails to operate correctly. Normal operation should be Reset button Cleaning the Unit If the faceplate of this unit is stained, wipe it with a ¤ • Applying spray cleaner directly to the unit may affect its mechanical parts. Wiping the faceplate with a hard cloth or Before using this unit for the first time This unit is initially set on the Demonstration mode. About KENWOOD "Music Editor" of PC • "Music Editor" is recorded in the CD-ROM attached to this unit. • Refer to the attached installation manual for the installation method of "Music Editor". • Refer to the user’s manual recorded in the installation CD-ROM and Help of "Music Editor" for • The unit can play CD/ USB device created by "Music Editor". • Information about "Music Editor" upgrade is put on the site, www.kenwood.com.
~ .
explain more clearly how the controls are used.
Therefore, what appears on the display in the
illustrations may differ from what appears on the
display on the actual equipment, and some of the
illustrations on the display may be inapplicable.
Reset button is pressed.
device installed can damage the data contained in
the USB device. For how to remove the USB device,
refer to
restored.
dry soft cloth such as a silicon cloth.
If the faceplate is stained badly, wipe the stain off with
a cloth moistened with neutral cleaner, then wipe it
again with a clean soft dry cloth.
using a volatile liquid such as thinner or alcohol may scratch
the surface or erases characters.
When using this unit for the first time, cancel the
application attached to DPX502
the operation method of "Music Editor".