Kenwood DPX502 User Manual
Page 17
English
|
17
Playing USB (iPod) device
When the USB device is not connected
Connect the USB device
Playback of the file contained in the USB device
starts.
When the USB device is connected
Select USB source
Press the [SRC] button.
Select the "USB" (or "iPod") display.
⁄
• For the audio files that can be played with this unit and
the devices that can be connected to this unit, refer to
• The word "iPod" appearing in this manual indicates the
iPod connected with the KCA-iP200 (optional accessory).
Refer to
• If you start playback after connecting the iPod, the music
that has been played by the iPod is played first.
In this case, "RESUMING" is displayed without displaying
a folder name, etc. Changing the browse item will
display a correct title, etc.
• When the iPod is connected to this unit, "KENWOOD" or
"
✓" is displayed on the iPod to indicate that you cannot
operate the iPod.
• When the USB device is connected to this unit, it can be
charged up provided that this unit is powered.
• When the Multi Card Reader is used, refer to Search> (page 17). • After you stopped playing a file contained in the USB device, you can restart playing the file from the point • Be sure to insert the USB device connector as far as it will go. • You can play the file made by KENWOOD Music Editor by the same operation. Pause and play Press the Control knob. Removing the USB device 1 Set the remove mode as the USB source Press the [ 0] button for at least 2 seconds. "REMOVE" display blinks. 2 Remove the USB device. Drive Search Selecting the device inserted in the Multi Card 1 Put the playback to pause 2 Select a device Push the Control knob towards up or down. 3 Restart playback Press the [S.MODE] button. ⁄ • This unit is compliant with Multi Card Readers with a maximum of 4 slots. • If a device is inserted during connection of the Multi Card Reader, it is not recognized. Select the Remove
where you stopped its playback.
Even after removing the USB device, you can restart
playing the file from the point where you stopped its
playback as long as the files contained in the USB device
are all the same.
Each time you press the knob, the audio pauses or
plays.
Reader.
Press the [S.MODE] button.
mode with reference to
(page 17), remove the Card Reader, and then insert the
memory.