Kenwood DPX502 - Manual (Page 34)

34 | English
Installing the Escutcheon
For General Motors
1 Refer to the section the Hard Rubber Frame> and then
remove the hard rubber frame.
2 Cut out accessory 2 to meet the
shape of the opening of the center
console.
3 Attach accessory 2 to the unit.
For TOYOTA/ SCION
1 Refer to the section the Hard Rubber Frame> and then
remove the hard rubber frame.
2 Cut out accessory 2 as illustrated.
⁄
• When cutting out accessory 2, make
sure it fits the opening of the center
console.
3 Fold double-sided adhesive
(accessory 3) along the slit and
attach it to accessory 2 cut-out
against the center rib as illustrated.
Use 2 pieces of accessory 3 for 1
accessory 2 cut-out.
4 Attach accessory 2 cut-out to the
unit.
Accessory2
Cut out to meet the shape of the
opening in the vehicle.
Cutting line
Accessory2
Accessory3