Konica Minolta DiMAGE Scan Dual III AF-2840 - Manual (Page 23)

23
Insert the cassette into the film chamber as
shown (3). Close the chamber door (4); the
film-chamber release will return to its original
position (5).
When the indicator lamp glows steadily, open
the front door until the top of the door is
aligned with the APS adapter mark.
With the scanner contacts face up, insert the
adapter into the scanner until it stops. The
scanner detects the holder and automatically
loads the film. Do not remove the holder until
the film has been rewound, see the ejecting a
film holder section below.
Do not remove the APS film from the cassette.
When using the APS adapter, if the scanner makes a strange sound or the film-advance warning
appears, press the eject button to remove the adapter. Follow the instructions in the troubleshoot-
ing section (p.86).
3
4
5
Ejecting a film holder
Use the eject button on the scanner body or in the
DiMAGE Scan Dual III Utility window to remove the
holder; the scanner automatically ejects the holder to
its initial insertion position. Do not touch or hinder the
holder while it is moving.
When using the optional APS Adapter, the scanner
automatically rewinds the film when the eject button is
pressed. Do not remove the adapter until the rewind
motor has stopped.
Close the front door when the scanner is not in use.