Kenwood KCA-S210A - Manual (Page 7)

English
-7
If you want to listen to the sound from the unit connected to the TO CHANGER 2 terminal of the
switching unit, turn the power off, set the AUX switch to “OFF”, and then select .
NOTE
If the unit you are connecting belongs to group C
1
1-2 MD/CD
CH
2
If the unit you are connecting belongs to group B
If you want to listen to the sound from the unit connected to the TO CHANGER 1 terminal of the
switching unit, first either turn the centre unit power off, or select another source, and then set the AUX
switch to “OFF”, and select .
NOTE
If the unit you are connecting belongs to group D
Leave the AUX switch in the “ON” position. If you move the AUX switch on the switching unit to the
“OFF” setting, will not appear when you select the source.
2CAUTION
R
L AUX
I
AUX
SWITCH
OFF
ON
PROTOCOL
SWITCH
O
N
1
2
1
2
Either switch the centre unit power off, or select another
source, then set the switching unit AUX switch to “ON”.
On the centre unit, select .
The sound input to the AUX terminal will now be output.
The centre unit display will stay in the following state:
Disc No.=1, Track No.=1, Playing time = 0 min 0 sec
Turn the centre unit power off, then set the switching unit
AUX switch to “ON”.
On the centre unit, select .
The sound input to the AUX terminal will now be output.
Turn the centre unit power OFF, then set the AUX switch on
the switching unit to “ON”.
On the centre unit, select .
The sound input to the AUX terminal will now be output.
R
L AUX
AUX
SWITCH
OFF
ON
PROTOCOL
SWITCH
O
N
R
L AUX
AUX
SWITCH
OFF
ON
PROTOCOL
SWITCH
O
N
or