Kenwood KDC-7024 - Manual (Page 38)

Toggles ON or OFF the mute control on the built-in amplifier.
Turning ON this control enhances the preout quality.
Display Setting
"AMP Mute OFF" The built-in amplifier activates.
"AMP Mute ON" The built-in amplifier deactivates.
Built-in Amp Mute Setting
Switching the preout between the rear and non-fading. (In non-
fading it outputs without effect from the fader control.)
Display Setting
"SWPRE Rear" Rear preout.
"SWPRE N-Fad" Non-fading preout.
Switching preout
Setting display/don't display for the System Q factors (Bass
center frequency, Bass Q factor, Bass extend, Middle center
frequency, Middle Q factor, and Treble center frequency) in
Audio control.
Display Setting
"System Q ON" The System Q factors are displayed.
"System Q OFF" The System Q factors aren't displayed.
System Q Setting
This function sets the opening and closing operation of a panel
when a disc is inserted and when it is ejected.
Display Setting
"Ejct Ang Slp" Opens and closes the panel while
maintaining the angle of the control panel
to the set angle.
"Ejct Ang Lvl" Opens and closes the panel after setting
the angle of the control panel to the
horizontal position.
Eject angle setting
Setting the time until the faceplate hide operation starts after the
power is turned OFF.
The faceplate can be removed only during the set time period.
Display and Setting
"Off Wait 0s"
"Off Wait 3s" (Original setting)
"Off Wait 25s"
…
…
OFF Wait Time Setting
Menu system
— 38 —
English
KDC-M7024_U.S_r2 03.1.15 10:11 AM Page 38