Kenwood KDC-7024 User Manual
Page 32
Inputting the telephone number with number buttons on the
optional remote, and dialing.
1
Select the key function section
Press the [NEXT] button.
Repeatedly press the button until "H-F" is displayed above the [2]
button.
Refer to
2
Enter Hands Free mode
Press the [2] ("H-F") button.
3
Select the Dial Mode
Press the [3] ("DIAL") button.
4
Enter the telephone number
Press the number [#], [*] and [+](ANG) buttons on the
optional remote.
• You can input max 32 digits.
• If an incorrect digit is entered, pressing the
[
4]
button will clear
it.
5
Dial an input number
Press the [4] ("CALL") button.
6
Hang up
Press the [2] ("HANG") button.
Canceling the Hands Free mode
Press the [RTN] button.
Direct Dial
(Function of the KCA-RC420)
7
Hang up
Press the [2] ("HANG") button.
Canceling the Hands Free mode
Press the [RTN] button.
Selecting a telephone number from the phone book.
1
Select the key function section
Press the [NEXT] button.
Repeatedly press the button until "H-F" is displayed above the [2]
button.
Refer to
2
Enter Hands Free mode
Press the [2] ("H-F") button.
3
Select the Phone Book Search Mode item
Press the [2] ("SRCH") button.
Each time the button is pressed the mode switches as follows:
Phone Book Search Mode item
Display
Initial Select Mode
"Initial"
Redial Mode
"Redial"
4
Select the initial of a person to dial (In Initial Select Mode)
Press the [FM] or [AM] button.
Initials including no corresponding name will not be displayed.
5
Switch the Name
Press the [
4] or [¢] button.
Switching between the Name and Telephone Number
Press the [TI] button.
• Not available if the name has not been stored.
• Not applicable if the text scroll function has been set to Auto (in
menu).
Scrolling the Name and Telephone Number
Press the [SCRL] button.
6
Dial a selected number
Press the [4] ("CALL") button.
Phone Book Search
GSM Hands Free Unit control features
— 32 —
English
KDC-M7024_U.S_r2 03.1.15 10:11 AM Page 32