Kenwood KDC-7024 User Manual
Page 18
Makes the sound different for the front channel and rear
channel.
1
Select the source
Press the [SRC] button.
Select the source sound to be output from the Dual zone
channel.
2
Select the key function section
Press the [NEXT] button.
Repeatedly press the button until "2-ZN" is displayed above the
[5] button.
Refer to
3
Enter the Dual Zone System Control mode
Press the [5] ("2-ZN") button.
4
Select the item for adjustment
Press the desired [2] — [3] button.
Each time the button is pressed the items that can be adjusted
switch as shown below.
Adjustment Item
Button Display
Range
Dual Zone System
[2]
"ON"/"OFF"
ON/OFF
Dual Zone System
Front & Rear
[3]
"F—R"
Front/Rear
Dual Zone System
The "CALL" display disappears and the audio system comes back
ON.
When the call ends
Hang up the phone.
The "CALL" display disappears and the audio system comes back
ON.
The audio system automatically mutes when a call comes in.
When a call comes in
"CALL" is displayed.
The audio system pauses.
Listening to the audio during a call
Press the [SRC] button.
TEL Mute
Prevents tampering with the unit while your car is being serviced
etc.
Hiding the control panel
Press the [SRC] button for at least 1 second.
When the time set in
the panel is hidden and the power turns OFF.
Showing the control panel
Press the left part at the lower side of the panel.
The panel is opened to enable the operation.
Hiding the Control Panel
General features
— 18 —
English
KDC-M7024_U.S_r2 03.1.15 10:10 AM Page 18