Kenwood KDC-7024 - Manual (Page 20)

Putting the station in the memory.
1 Select the band
Press the [FM] or [AM] button.
2 Select the frequency to put in the memory
Press the [
4] or [¢] button.
3 Select the key function section
Press the [NEXT] button.
Repeatedly press the button until the function item is not
displayed above the [2] — [5] button.
Refer to (page 8).
4 Put the frequency in the memory
Press the desired [1] — [6] button for at least 2 seconds.
Station Preset Memory
Selecting the station.
1 Select tuner source
Press the [SRC] button.
Select the "TUNER" display.
2 Select the band
Press the [FM] or [AM] button.
Each time the [FM] button is pressed it switches between the
FM1, FM2, and FM3 bands.
3 Tune up or down band
Press the [
4] or [¢] button.
During reception of stereo stations the "ST" indicator is ON.
Tuning
Tuner features
— 20 —
English
NAME.S NF
RTN NEXT
DAB
1-6
MENU
NEXT
4 ¢ AM FM SRC
ST indicator
Band display Frequency display
Preset station number
KDC-M7024_U.S_r2 03.1.15 10:10 AM Page 20