Kenwood TK-2180 - Manual (Page 41)

35
■ C
LEARING
S
TORED
DTMF N
UMBERS
1 Press the key programmed as Autodial
Programming.
2 Rotate the selector, press the and C> keys, or
press the appropriate DTMF key (01 ~ 32) to select
your desired Autodial list number.
3 Press the A or # key.
• “ ” appears on the display after confirming the
entered number.
4 Press the S or key to delete the entry from the
Autodial list.
• The selected memory location is cleared.
R
EDIAL
(K
EYPAD
M
ODELS
O
NLY
)
You can redial the last number you transmitted.
1 Press the key programmed as Autodial.
• The first entry in the Autodial list appears on the display.
2 Press the key followed by the 0 key to display the last
called number.
3 Press the PTT switch to make the call.
Note: Switching OFF the transceiver power clears the redial
memory.
C
ONNECT
/ D
ISCONNECT
ID
S
(K
EYPAD
M
ODELS
O
NLY
)
1 Press the key programmed as Autodial.
• The first entry in the Autodial list appears on the display.
2 Connect ID: Press the key two times.
Disconnect ID: Press the key followed by the # key.
3 Press the PTT switch to make the call.