Kenwood TK-2180 - Manual (Page 39)

33
S
TORE AND
S
END
Store and send allows you to make DTMF calls without the
need for a DTMF keypad.
1 Press the key programmed as Autodial.
• “ ” appears on the display.
2 Rotate the selector to select a digit.
• Alternatively, you can enter the digits by using the DTMF
keypad (keypad models only).
3 Press the C> key to accept the entered digit and move to
the next digit.
• Press the A or # key to delete an incorrect character. Press
and hold the A or # key to delete all entered characters.
• You can enter up to 30 digits.
4 Press the PTT switch to make the call after the entire
number is entered.
A
UTODIAL
Autodial allows you to store 32 names (up to 12 characters
per name) and DTMF numbers (up to 16 digits per number).
■ S
TORING
DTMF N
UMBERS
1 Press the key programmed as Autodial
Programming.
• The first entry in the Autodial list appears on the display.
2 Rotate the selector, press the and C> keys, or
press the appropriate DTMF key (01 ~ 32) to select
your desired Autodial list number.
3 Enter the desired name using the selector or keypad.
Rotate the selector or press the keypad to select a
character, then press the C> key to confirm the
character and move the cursor to the right. Repeat
this operation until the complete name is entered, then
press the S key to confirm the entry.