Kenwood KDV-MP765 - Manual (Page 35)

English | 35
Connecting Wires to Terminals
� �
����
���
��� ����
��� ����
���� �
���� �
���� �
����� �
����� �
������
�����
����
��� ��
������
����
���� ����
������
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
����� ���
����� ���
FM/AM antenna input
Wiring harness
(Accessory1)
Ignition wire (Red)
Battery wire (Yellow)
Ground wire (Black) - (To car chassis)
Ignition key
switch
Car fuse box
(Main fuse)
ACC
Car fuse box
Battery
Dimmer control wire (Orange / White)
To car light control switch
To front left speaker
To front right speaker
To rear left speaker
To rear right speaker
White/Black
White
Gray/Black
Gray
Green/Black
Green
Purple/Black
Purple
Connect to the terminal that is grounded when either the
telephone rings or during conversation. To connect the
KENWOOD navigation system, consult your navigation manual.
Line mute wire (Brown)
Fuse (10 A)
Power control wire (Blue/White)
Motor antenna control wire (Blue)
When using the optional power amplifier, connect to its power
control terminal.
Depending on what antenna you are using, connect either to
the control terminal of the motor antenna, or to the power
terminal for the booster amplifier of the film-type antenna.
Video output for rear seats (Yellow)
Subwoofer output (Brown)
Center output (Gray)
Monitor unit for
front seats.
To parking brake detection switch
harness of car Parking sensor wire
(Green)
For the sake of safety, be sure to
connect the parking sensor.
Connection cable (Green) (Accessory5)
Video cable (Accessory7)
Rear left output (White)
Rear right output (Red)
Front left output (White)
Front right output (Red)
AUX left input (White)
AUX right input (Red)
If no connections are made, do not
let the wire come out from the tab.
Video output for front seats (Yellow)