Kenwood KDV-MP765 - Manual (Page 25)

English | 25
Setting the Audio setup
1 Select "AUDIO SETUP" page
See 'DVD setup mode' (page 23) to select
"AUDIO SETUP".
2 Select the audio setup item
Press the [
5], [∞], [2] or [3] button to select
an item.
Press the [ENTER/
£] button.
"AUDIO OUT"
You cannot change this item setup. Use it as it is.
"OUTPUT MODE"
You cannot change this item setup. Use it as it is.
"DUAL MONO"
Set the sound which will be output when playing
DVD recorded by Dual Mono (1+1) of Dolby
Digital.
Display Setting
"STEREO" Stereo (L / R)
"L-MONO" Monaural Left (L / L)
"R-MONO" Monaural Right (R / R)
"MIX-MONO" Mixed Left and Right (L+R)
"DYNAMIC"
Sets the dynamic range of playback sound
recorded on a Dolby Digital system DVD.
Display Setting
"FULL"
For more powerful sound at regular
volumes
"7/8"
Large
±
Compression rate
≠
Small
"6/8" / "3/4"
"5/8"
"4/8" / "1/2"
"3/8"
"2/8" / "1/4"
"1/8"
"OFF"
For the regular sound
"PRO LOGIC"
Set the use of Dolby Pro Logic for the Dolby
Digital 2-channel DVD/VCD, CD-DA or MP3.
Display Setting
"OFF" Turns the Dolby Pro-Logic function Off.
"ON" Turns the Dolby Pro-Logic function On.
"AUTO"
Turns the Dolby Surround play On
automatically when available.
• You cannot operate Dolby Digital 5.1ch surround or
DTS 5.1ch surround DVD and DTS-CD are playing.
3 Exit Setup page
Select "MAIN PAGE" and press the [ENTER/
£]
button.